1 files changed, 477 insertions, 0 deletions
diff --git a/markup/pod/live-manual/media/text/po/ca/user_managing_a_configuration.ssi.po b/markup/pod/live-manual/media/text/po/ca/user_managing_a_configuration.ssi.po
new file mode 100644
index 0000000..01ae9e8
--- /dev/null
+++ b/markup/pod/live-manual/media/text/po/ca/user_managing_a_configuration.ssi.po
@@ -0,0 +1,477 @@
+# Catalan translations for live-manual package
+# Copyright (C) 2012-2015 Carlos Zuferri <chals@altorricon.com>
+# This file is distributed under the same license as the live-manual package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: live-manual 4.0~a4-1\n"
+"POT-Creation-Date: 2014-11-27 13:50+0100\n"
+"PO-Revision-Date: 2014-11-27 14:12+0100\n"
+"Last-Translator: Carlos Zuferri <chals@altorricon.com>\n"
+"Language-Team: none\n"
+"Language: ca\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Plain text
+#: en/about_manual.ssi:92 en/about_manual.ssi:100 en/about_manual.ssi:108
+#: en/about_manual.ssi:116 en/about_manual.ssi:124 en/about_manual.ssi:132
+#: en/appendix_style-guide.ssi:124 en/appendix_style-guide.ssi:134
+#: en/appendix_style-guide.ssi:144 en/appendix_style-guide.ssi:154
+#: en/appendix_style-guide.ssi:164 en/appendix_style-guide.ssi:177
+#: en/examples.ssi:14 en/examples.ssi:30 en/examples.ssi:40 en/examples.ssi:54
+#: en/examples.ssi:68 en/examples.ssi:84 en/examples.ssi:94
+#: en/examples.ssi:107 en/examples.ssi:115 en/examples.ssi:125
+#: en/examples.ssi:135 en/examples.ssi:150 en/examples.ssi:158
+#: en/examples.ssi:166 en/examples.ssi:174 en/examples.ssi:190
+#: en/examples.ssi:204 en/examples.ssi:212 en/examples.ssi:220
+#: en/examples.ssi:236 en/examples.ssi:250 en/examples.ssi:258
+#: en/examples.ssi:266 en/examples.ssi:286 en/examples.ssi:294
+#: en/examples.ssi:303 en/examples.ssi:313 en/project_bugs.ssi:64
+#: en/project_coding-style.ssi:30 en/project_coding-style.ssi:40
+#: en/project_coding-style.ssi:53 en/project_coding-style.ssi:63
+#: en/project_coding-style.ssi:94 en/project_coding-style.ssi:102
+#: en/project_coding-style.ssi:112 en/project_coding-style.ssi:123
+#: en/project_contributing.ssi:34 en/project_contributing.ssi:45
+#: en/project_contributing.ssi:59 en/project_contributing.ssi:68
+#: en/project_contributing.ssi:79 en/project_contributing.ssi:87
+#: en/project_git.ssi:8 en/project_git.ssi:16 en/project_git.ssi:24
+#: en/project_git.ssi:34 en/project_git.ssi:44 en/project_git.ssi:56
+#: en/project_procedures.ssi:39 en/project_procedures.ssi:51
+#: en/user_basics.ssi:50 en/user_basics.ssi:58 en/user_basics.ssi:68
+#: en/user_basics.ssi:86 en/user_basics.ssi:100 en/user_basics.ssi:113
+#: en/user_basics.ssi:121 en/user_basics.ssi:159 en/user_basics.ssi:167
+#: en/user_basics.ssi:179 en/user_basics.ssi:190 en/user_basics.ssi:198
+#: en/user_basics.ssi:210 en/user_basics.ssi:218 en/user_basics.ssi:226
+#: en/user_basics.ssi:238 en/user_basics.ssi:250 en/user_basics.ssi:260
+#: en/user_basics.ssi:270 en/user_basics.ssi:288 en/user_basics.ssi:319
+#: en/user_basics.ssi:335 en/user_basics.ssi:343 en/user_basics.ssi:363
+#: en/user_basics.ssi:390 en/user_basics.ssi:406
+#: en/user_customization-binary.ssi:18 en/user_customization-contents.ssi:24
+#: en/user_customization-contents.ssi:33 en/user_customization-contents.ssi:51
+#: en/user_customization-installer.ssi:32
+#: en/user_customization-installer.ssi:44
+#: en/user_customization-packages.ssi:14 en/user_customization-packages.ssi:22
+#: en/user_customization-packages.ssi:40 en/user_customization-packages.ssi:53
+#: en/user_customization-packages.ssi:67 en/user_customization-packages.ssi:95
+#: en/user_customization-packages.ssi:106
+#: en/user_customization-packages.ssi:114
+#: en/user_customization-packages.ssi:138
+#: en/user_customization-packages.ssi:151
+#: en/user_customization-packages.ssi:161
+#: en/user_customization-packages.ssi:171
+#: en/user_customization-packages.ssi:195
+#: en/user_customization-packages.ssi:211
+#: en/user_customization-packages.ssi:290
+#: en/user_customization-packages.ssi:302
+#: en/user_customization-packages.ssi:312
+#: en/user_customization-packages.ssi:326
+#: en/user_customization-packages.ssi:342
+#: en/user_customization-packages.ssi:359 en/user_customization-runtime.ssi:14
+#: en/user_customization-runtime.ssi:26 en/user_customization-runtime.ssi:44
+#: en/user_customization-runtime.ssi:56 en/user_customization-runtime.ssi:75
+#: en/user_customization-runtime.ssi:83 en/user_customization-runtime.ssi:92
+#: en/user_customization-runtime.ssi:121 en/user_customization-runtime.ssi:131
+#: en/user_customization-runtime.ssi:139 en/user_customization-runtime.ssi:148
+#: en/user_customization-runtime.ssi:157 en/user_customization-runtime.ssi:172
+#: en/user_customization-runtime.ssi:202 en/user_customization-runtime.ssi:210
+#: en/user_customization-runtime.ssi:219 en/user_customization-runtime.ssi:229
+#: en/user_customization-runtime.ssi:237 en/user_customization-runtime.ssi:245
+#: en/user_customization-runtime.ssi:253 en/user_customization-runtime.ssi:261
+#: en/user_customization-runtime.ssi:269 en/user_customization-runtime.ssi:277
+#: en/user_customization-runtime.ssi:285 en/user_installation.ssi:38
+#: en/user_installation.ssi:48 en/user_installation.ssi:56
+#: en/user_installation.ssi:66 en/user_installation.ssi:74
+#: en/user_installation.ssi:82 en/user_installation.ssi:106
+#: en/user_installation.ssi:121 en/user_installation.ssi:134
+#: en/user_managing_a_configuration.ssi:22
+#: en/user_managing_a_configuration.ssi:32
+#: en/user_managing_a_configuration.ssi:55
+#: en/user_managing_a_configuration.ssi:67
+#: en/user_managing_a_configuration.ssi:76 en/user_overview.ssi:34
+#: en/user_overview.ssi:47 en/user_overview.ssi:55
+msgid "code{"
+msgstr "code{"
+
+#. type: Plain text
+#: en/about_manual.ssi:96 en/about_manual.ssi:104 en/about_manual.ssi:112
+#: en/about_manual.ssi:120 en/about_manual.ssi:128 en/about_manual.ssi:136
+#: en/appendix_style-guide.ssi:128 en/appendix_style-guide.ssi:138
+#: en/appendix_style-guide.ssi:148 en/appendix_style-guide.ssi:158
+#: en/appendix_style-guide.ssi:173 en/appendix_style-guide.ssi:182
+#: en/examples.ssi:20 en/examples.ssi:34 en/examples.ssi:44 en/examples.ssi:62
+#: en/examples.ssi:72 en/examples.ssi:90 en/examples.ssi:103
+#: en/examples.ssi:111 en/examples.ssi:119 en/examples.ssi:129
+#: en/examples.ssi:142 en/examples.ssi:154 en/examples.ssi:162
+#: en/examples.ssi:170 en/examples.ssi:178 en/examples.ssi:198
+#: en/examples.ssi:208 en/examples.ssi:216 en/examples.ssi:232
+#: en/examples.ssi:240 en/examples.ssi:254 en/examples.ssi:262
+#: en/examples.ssi:270 en/examples.ssi:290 en/examples.ssi:299
+#: en/examples.ssi:309 en/examples.ssi:326 en/project_bugs.ssi:68
+#: en/project_coding-style.ssi:36 en/project_coding-style.ssi:47
+#: en/project_coding-style.ssi:59 en/project_coding-style.ssi:70
+#: en/project_coding-style.ssi:98 en/project_coding-style.ssi:106
+#: en/project_coding-style.ssi:119 en/project_coding-style.ssi:130
+#: en/project_contributing.ssi:41 en/project_contributing.ssi:55
+#: en/project_contributing.ssi:64 en/project_contributing.ssi:73
+#: en/project_contributing.ssi:83 en/project_contributing.ssi:90
+#: en/project_git.ssi:12 en/project_git.ssi:20 en/project_git.ssi:28
+#: en/project_git.ssi:38 en/project_git.ssi:48 en/project_git.ssi:60
+#: en/project_procedures.ssi:47 en/project_procedures.ssi:92
+#: en/user_basics.ssi:54 en/user_basics.ssi:62 en/user_basics.ssi:72
+#: en/user_basics.ssi:91 en/user_basics.ssi:105 en/user_basics.ssi:117
+#: en/user_basics.ssi:125 en/user_basics.ssi:163 en/user_basics.ssi:171
+#: en/user_basics.ssi:184 en/user_basics.ssi:194 en/user_basics.ssi:202
+#: en/user_basics.ssi:214 en/user_basics.ssi:222 en/user_basics.ssi:230
+#: en/user_basics.ssi:242 en/user_basics.ssi:254 en/user_basics.ssi:264
+#: en/user_basics.ssi:274 en/user_basics.ssi:311 en/user_basics.ssi:323
+#: en/user_basics.ssi:339 en/user_basics.ssi:347 en/user_basics.ssi:374
+#: en/user_basics.ssi:394 en/user_basics.ssi:410
+#: en/user_customization-binary.ssi:25 en/user_customization-contents.ssi:29
+#: en/user_customization-contents.ssi:43 en/user_customization-contents.ssi:55
+#: en/user_customization-installer.ssi:38
+#: en/user_customization-installer.ssi:49
+#: en/user_customization-packages.ssi:18 en/user_customization-packages.ssi:26
+#: en/user_customization-packages.ssi:45 en/user_customization-packages.ssi:59
+#: en/user_customization-packages.ssi:71
+#: en/user_customization-packages.ssi:100
+#: en/user_customization-packages.ssi:110
+#: en/user_customization-packages.ssi:118
+#: en/user_customization-packages.ssi:143
+#: en/user_customization-packages.ssi:157
+#: en/user_customization-packages.ssi:167
+#: en/user_customization-packages.ssi:177
+#: en/user_customization-packages.ssi:201
+#: en/user_customization-packages.ssi:216
+#: en/user_customization-packages.ssi:294
+#: en/user_customization-packages.ssi:306
+#: en/user_customization-packages.ssi:316
+#: en/user_customization-packages.ssi:330
+#: en/user_customization-packages.ssi:355
+#: en/user_customization-packages.ssi:364 en/user_customization-runtime.ssi:18
+#: en/user_customization-runtime.ssi:30 en/user_customization-runtime.ssi:48
+#: en/user_customization-runtime.ssi:69 en/user_customization-runtime.ssi:79
+#: en/user_customization-runtime.ssi:88 en/user_customization-runtime.ssi:97
+#: en/user_customization-runtime.ssi:125 en/user_customization-runtime.ssi:135
+#: en/user_customization-runtime.ssi:144 en/user_customization-runtime.ssi:153
+#: en/user_customization-runtime.ssi:162 en/user_customization-runtime.ssi:180
+#: en/user_customization-runtime.ssi:206 en/user_customization-runtime.ssi:215
+#: en/user_customization-runtime.ssi:223 en/user_customization-runtime.ssi:233
+#: en/user_customization-runtime.ssi:241 en/user_customization-runtime.ssi:249
+#: en/user_customization-runtime.ssi:257 en/user_customization-runtime.ssi:265
+#: en/user_customization-runtime.ssi:273 en/user_customization-runtime.ssi:281
+#: en/user_customization-runtime.ssi:289 en/user_installation.ssi:42
+#: en/user_installation.ssi:52 en/user_installation.ssi:62
+#: en/user_installation.ssi:70 en/user_installation.ssi:78
+#: en/user_installation.ssi:86 en/user_installation.ssi:111
+#: en/user_installation.ssi:128 en/user_installation.ssi:139
+#: en/user_managing_a_configuration.ssi:28
+#: en/user_managing_a_configuration.ssi:43
+#: en/user_managing_a_configuration.ssi:61
+#: en/user_managing_a_configuration.ssi:72
+#: en/user_managing_a_configuration.ssi:80 en/user_overview.ssi:41
+#: en/user_overview.ssi:51 en/user_overview.ssi:59
+msgid "}code"
+msgstr "}code"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:2
+msgid ":B~ Managing a configuration"
+msgstr ":B~ Gestió d'una configuració"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:4
+msgid "1~managing-a-configuration Managing a configuration"
+msgstr "1~managing-a-configuration Gestió d'una configuració"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:6
+msgid ""
+"This chapter explains how to manage a live configuration from initial "
+"creation, through successive revisions and successive releases of both the "
+"live-build software and the live image itself."
+msgstr ""
+"En aquest capítol s'explica com gestionar una configuració d'un sistema en "
+"viu des de la seva creació inicial, a través de revisions i versions "
+"successives de tant el programari live-build com de la imatge en viu en si "
+"mateixa."
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:8
+msgid "2~ Dealing with configuration changes"
+msgstr "2~ Gestionar canvis en la configuració"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:10
+msgid ""
+"Live configurations rarely are perfect on the first try. It may be fine to "
+"pass #{lb config}# options from the command-line to perform a single build, "
+"but it is more typical to revise those options and build again until you are "
+"satisfied. To support these changes, you will need auto scripts which ensure "
+"your configuration is kept in a consistent state."
+msgstr ""
+"Les configuracions de sistemes en viu poques vegades són perfectes al primer "
+"intent. Passar opcions a #{lb config}# des de la línea d'ordres pot estar be "
+"per a construir una imatge una vegada, però és més típic revisar aquestes "
+"opcions i construir de nou fins que se'n estigui satisfet. Per a donar "
+"suport a aquests canvis, es poden utilitzar scripts auto que assegurin que "
+"la configuració es manté en un estat consistent."
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:12
+msgid "3~ Why use auto scripts? What do they do?"
+msgstr "3~ Per què utilitzar scripts auto? Què fan?"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:14
+msgid ""
+"The #{lb config}# command stores the options you pass to it in #{config/*}# "
+"files along with many other options set to default values. If you run #{lb "
+"config}# again, it will not reset any option that was defaulted based on "
+"your initial options. So, for example, if you run #{lb config}# again with a "
+"new value for #{--binary-images}#, any dependent options that were defaulted "
+"for the old image type may no longer work with the new ones. Nor are these "
+"files intended to be read or edited. They store values for over a hundred "
+"options, so nobody, let alone yourself, will be able to see in these which "
+"options you actually specified. And finally, if you run #{lb config}#, then "
+"upgrade live-build and it happens to rename an option, #{config/*}# would "
+"still contain variables named after the old option that are no longer valid."
+msgstr ""
+"L'ordre #{lb config}# emmagatzema les opcions que se li passen als fitxers "
+"de #{config/*}#, juntament amb moltes altres opcions que estan establertes "
+"als valors per defecte. Si s'executa un cop més, #{lb config}# no es "
+"restablirà cap de les opcios dependents basades en les opcions inicials. "
+"Així, per exemple, si s'executa de nou #{lb config}# amb un nou valor per a "
+"#{--binary-images}#, totes les opcions que en depenen que es van omplir per "
+"al tipus de imatge per defecte ja no poden funcionar amb la nova. Aquests "
+"fitxers no estan destinats a ser llegits o editats. S'emmagatzemen els "
+"valors de més de cent opcions, i ningú pot veure les opcions que s'han "
+"especificat realment. I finalment, si s'executa #{lb config}# i a "
+"continuació s'actualitza live-build i el nom d'una opció canvia, #{config/*}"
+"# encara contindrà les variables de l'opció vella que ja no són vàlides."
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:16
+msgid ""
+"For all these reasons, #{auto/*}# scripts will make your life easier. They "
+"are simple wrappers to the #{lb config}#, #{lb build}# and #{lb clean}# "
+"commands that are designed to help you manage your configuration. The #{auto/"
+"config}# script stores your #{lb config}# command with all desired options, "
+"the #{auto/clean}# script removes the files containing configuration "
+"variable values, and the #{auto/build}# script keeps a #{build.log}# of each "
+"build. Each of these scripts is run automatically every time you run the "
+"corresponding #{lb}# command. By using these scripts, your configuration is "
+"easier to read and is kept internally consistent from one revision to the "
+"next. Also, it will be much easier for you identify and fix options which "
+"need to change when you upgrade live-build after reading the updated "
+"documentation."
+msgstr ""
+" Per totes aquestes raons, els scripts #{auto/*}# ens fan la vida més fàcil. "
+"Són simples embolcalls per les ordres #{lb config}#, #{lb build}# i #{lb "
+"clean}# dissenyats per ajudar a gestionar una configuració. Només cal crear "
+"un script #{auto/config}# que contingui totes les opcions que es desitgin "
+"per a #{lb config}#, i un #{auto/clean}# que elimini els fitxers que "
+"continguin diversos valors de variables de configuració, i el script #{auto/"
+"build}# guarda un #{build.log}# de cada construcció. Cada vegada que "
+"s'executi l'ordre #{lb}# corresponent, aquests fitxers seran executats "
+"automàticament. L'ús d'aquests scripts assegurarà que la configuració sigui "
+"més senzilla de llegir i que guardi una coherència interna d'una reversió a "
+"una altra. A més a més serà més fàcil identificar i solucionar les opcions "
+"que s'han de canviar al actualitzar d'una versió de live-build a la següent "
+"després de llegir la documentació."
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:18
+msgid "3~ Use example auto scripts"
+msgstr "3~ Utilitzar scripts auto d'exemple"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:20
+msgid ""
+"For your convenience, live-build comes with example auto shell scripts to "
+"copy and edit. Start a new, default configuration, then copy the examples "
+"into it:"
+msgstr ""
+"Per a més comoditat, live-build ve amb uns scripts d'exemple per a copiar i "
+"editar. Iniciar una nova configuració per defecte, i a continuació, copiar "
+"els exemples:"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:26
+#, no-wrap
+msgid ""
+" $ mkdir mylive && cd mylive && lb config\n"
+" $ mkdir auto\n"
+" $ cp /usr/share/doc/live-build/examples/auto/* auto/\n"
+msgstr ""
+" $ mkdir mylive && cd mylive && lb config\n"
+" $ mkdir auto\n"
+" $ cp /usr/share/doc/live-build/examples/auto/* auto/\n"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:30
+msgid "Edit #{auto/config}#, adding any options as you see fit. For instance:"
+msgstr "Editar #{auto/config}#, afegint les opcions més adients. Per exemple:"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:41
+#, no-wrap
+msgid ""
+" #!/bin/sh\n"
+" lb config noauto \\\n"
+"     --architectures i386 \\\n"
+"     --linux-flavours 686-pae \\\n"
+"     --binary-images hdd \\\n"
+"     --mirror-bootstrap http://ftp.ch.debian.org/debian/ \\\n"
+"     --mirror-binary http://ftp.ch.debian.org/debian/ \\\n"
+"     \"${@}\"\n"
+msgstr ""
+" #!/bin/sh\n"
+" lb config noauto \\\n"
+"     --architectures i386 \\\n"
+"     --linux-flavours 686-pae \\\n"
+"     --binary-images hdd \\\n"
+"     --mirror-bootstrap http://ftp.ch.debian.org/debian/ \\\n"
+"     --mirror-binary http://ftp.ch.debian.org/debian/ \\\n"
+"     \"${@}\"\n"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:45
+msgid ""
+"Now, each time you use #{lb config}#, #{auto/config}# will reset the "
+"configuration based on these options. When you want to make changes to them, "
+"edit the options in this file instead of passing them to #{lb config}#. When "
+"you use #{lb clean}#, #{auto/clean}# will clean up the #{config/*}# files "
+"along with any other build products. And finally, when you use #{lb build}#, "
+"a log of the build will be written by #{auto/build}# in #{build.log}#."
+msgstr ""
+"Ara, cada vegada que s'utilitzi #{lb config}#, #{auto/config}# restablirà la "
+"configuració basada en aquestes opcions. Quan es vulgui fer canvis, editar "
+"les opcions d'aquest fitxer en lloc de passar-les a #{lb config}#. Quan "
+"s'utilitza #{lb clean}#, #{auto/clean}# netejarà els fitxers de #{config/*}# "
+"juntament amb els altres productes de construcció. I, finalment, quan "
+"s'utilitza #{lb build}#, es crea un log de la construcció mitjançant #{auto/"
+"build}# anomenat #{build.log}#."
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:47
+#, no-wrap
+msgid "*{Note:}* A special #{noauto}# parameter is used here to suppress another call to #{auto/config}#, thereby preventing infinite recursion. Make sure you don't accidentally remove it when making edits. Also, take care to ensure when you split the #{lb config}# command across multiple lines for readability, as shown in the example above, that you don't forget the backslash (\\) at the end of each line that continues to the next.\n"
+msgstr "*{Nota:}* Aquí s'utilitza un paràmetre especial #{noauto}# per a suprimir un altra crida a #{auto/config}#, la qual cosa impedeix la recursivitat infinita. Assegurar-se de no eliminarlo accidentalment fent canvis. També, tenir cura de que quan es divideix l'ordre #{lb config}# a través de diverses línies per a facilitar la lectura, com es mostra en l'exemple anterior, no s'oblidi la barra invertida (\\) al final de cada línia que segueix a la següent.\n"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:49
+msgid "2~clone-configuration-via-git Clone a configuration published via Git"
+msgstr ""
+"2~clone-configuration-via-git Clonar una configuració publicada via Git"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:51
+msgid ""
+"Use the #{lb config --config}# option to clone a Git repository that "
+"contains a live system configuration. If you would like to base your "
+"configuration on one maintained by the ${project}, look at http://live-"
+"systems.org/gitweb/ for the repository named #{live-images}# in the category "
+"#{Packages}#. This repository contains the configurations for the live "
+"systems {prebuilt images}#downloading-prebuilt-images."
+msgstr ""
+"Utilitzar l'opció #{lb config --config}# per a clonar un repositori Git que "
+"contingui una configuració en viu. Si es vol basar la configuració en un "
+"repositori mantingut pel ${project}, mirar el repositori a http://live-"
+"systems.org/gitweb/ amb el nom #{live-images}# sota el títol #{Packages}#. "
+"Aquest repositori conté les configuracions per a les {imatges prefabricades}"
+"#downloading-prebuilt-images"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:53
+msgid ""
+"For example, to build a standard image, use the #{live-images}# repository "
+"as follows:"
+msgstr ""
+"Per exemple, per a construir una imatge standard, utilitzar el repositori "
+"#{live-images}# de la manera següent:"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:59
+#, no-wrap
+msgid ""
+" $ mkdir live-images && cd live-images\n"
+" $ lb config --config git://live-systems.org/git/live-images.git\n"
+" $ cd images/standard\n"
+msgstr ""
+" $ mkdir live-images && cd live-images\n"
+" $ lb config --config git://live-systems.org/git/live-images.git\n"
+" $ cd images/standard\n"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:63
+msgid ""
+"Edit #{auto/config}# and any other things you need in the #{config}# tree to "
+"suit your needs. For example, the unofficial non-free prebuilt images are "
+"made by simply adding #{--archive-areas \"main contrib non-free\"}#."
+msgstr ""
+"Editar #{auto/config}# i qualsevol altra cosa necessària dins l'arbre "
+"#{config}# per a satisfer les necessitats pròpies. Per exemple, per a fer "
+"les imatges prefabricades no oficials que contenen paquets de la secció non-"
+"free simplement s'afegeix #{--archive-areas \"main contrib non-free\"}#."
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:65
+msgid ""
+"You may optionally define a shortcut in your Git configuration by adding the "
+"following to your #{${HOME}/.gitconfig}#:"
+msgstr ""
+"Si es desitja, es pot definir una drecera en la configuració de Git, afegint "
+"el següent a #{${HOME}/.gitconfig}#:"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:70
+#, no-wrap
+msgid ""
+" [url \"git://live-systems.org/git/\"]\n"
+"         insteadOf = lso:\n"
+msgstr ""
+" [url \"git://live-systems.org/git/\"]\n"
+"         insteadOf = lso:\n"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:74
+msgid ""
+"This enables you to use #{lso:}# anywhere you need to specify the address of "
+"a #{live-systems.org}# git repository. If you also drop the optional #{.git}"
+"# suffix, starting a new image using this configuration is as easy as:"
+msgstr ""
+"Això permet utilitzar #{lso:}# en qualsevol lloc on cal especificar la "
+"direcció d'un repositori git. També es pot omitir el sufix #{.git}#, i així, "
+"començar una nova imatge amb aquesta configuració és tan fàcil com:"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:78
+#, no-wrap
+msgid " $ lb config --config lso:live-images\n"
+msgstr " $ lb config --config lso:live-images\n"
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:82
+msgid ""
+"Cloning the entire #{live-images}# repository pulls the configurations used "
+"for several images. If you feel like building a different image after you "
+"have finished with the first one, change to another directory and again and "
+"optionally, make any changes to suit your needs."
+msgstr ""
+"Clonar tot el repositori #{live-images}# còpia les configuracions "
+"utilitzades per diverses imatges. Si es vol construir una imatge diferent "
+"després d'haver acabat amb la primera, canviar a un altre directori i un "
+"altre cop i, opcionalment, fer els canvis per a adaptar-les a les "
+"necessitats pròpies."
+
+#. type: Plain text
+#: en/user_managing_a_configuration.ssi:83
+msgid ""
+"In any case, remember that every time you will have to build the image as "
+"superuser: #{lb build}#"
+msgstr ""
+"En qualsevol cas, recordar que cada vegada que s'ha de construir una imatge, "
+"s'ha de fer com a superusuari: #{lb build}#"